Cambios al paso #4
Editado por Dieter —
Edicion rechazada por Jake Devincenzi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Remove the |
|---|---|
| + | [* red] Remove the three 1.3mm Phillips #00 screws securing the volume switch and the 1.8mm Phillips #00 screws securing the mute switch. |
| [* icon_note] The volume switch assembly sits on top of the mute switch. Make sure that the small soft pad on the mute switch is not lost, otherwise the mute switch will sit very loosely after reassembly. | |
| [* black] The mute switch assembly screws should be tightened with the switch in the off position. Check the protrusion of the switch when turned on, since it may not stick out far enough to operate if the switch assembly is incorrectly positioned. (Check the gap between the switch frame and the bezel (white gap showing between the two screws near the 6). The screw on the far right is slightly longer than the other 3 screws. When reassembling the phone, keep this in mind. |